Phone

+91 77188 50247
Get In Touch
Call us:+91 77188 50247
Contacts
Location
118/119, 1st Floor, Vardhaman Industrial Complex, Gokul Nagar, Old LBS Road, Thane (West) 400601
Maharashtra, India
Phone
+91 022 4129 1000
Email
enquiries@superbond.co.in,
Get In Touch
Get In Touch

Bookbinding Glue Manufacturer & Supplier in India

India’s publishers and print binderies trust Super Bond Adhesives since 1974 — hot melt, water-based, and PVA Bookbinding Glues made for strong, flexible, and long-lasting spine bonds.
Contact Us

Submit an Enquiry

(Get a reply within 1 working day)

OverviewWhat is Bookbinding Glue?

Bookbinding glue is an industrial adhesive that holds pages, spine, and cover together in a finished book. At Super Bond Adhesives, we make two types — Hot Melt Adhesive for fast automated binding lines, and Water-Based (PVA) Adhesive for flexible, eco-friendly binding at room temperature.

Our bookbinding glues are used for:

  • Bonding cloth, board, or paper covers firmly to the book spine
  • Securing page-blocks and fixing endpapers to hardcover cases
  • Perfect binding, case binding, softcover, and paperback production
  • High-speed automated lines that need fast set and strong adhesion

Industries servedWho Uses Our Bookbinding Glue?

From large publishers on automated perfect binding lines to small binderies doing custom work — Super Bond Adhesives has the right book binding adhesive for every setup. Hot melt for speed, water-based PVA for flexibility.

Publishing Houses

Perfect binding and case binding for trade books, textbooks, and novels.

Commercial Printers

Spine & side gluing for catalogues, magazines, & large automated print runs.

Notebook & Diary Manufacturers

Cover bonding and page-block binding for diaries, notebooks, and registers.

Print-on-Demand / Digital Print

Short-run binding on coated stocks needing fast set and consistent adhesion.

Stationery Manufacturers

Exercise books, ledger binding, and pad binding at production scale.

Bookbinderies & Job Workers

Restoration, specialty, and re-binding work across all paper and cover types.

Why Super BondWhat Makes Our Bookbinding Glue Different

Every grade is built around one goal — books that stay bound, lines that keep running.

Strong Initial Bond

Grips firmly on contact so pages and covers stay aligned during the bonding stage.

Fast Set Time

Engineered for high-speed and semi-automated lines to cut downtime and keep output moving.

High Peel Strength

Stays flexible after setting so books open flat without the spine cracking or lifting.

Consistent Viscosity & Flow

Every batch meets the same viscosity standard for smooth, repeatable machine performance.

Available in Bulk

Supplied in blocks, jerry cans, and drums — hot melt or water-based — at industrial scale.

Technical Support Included

Our team helps you pick the right grade, temperature, and settings for your machine.

The DifferenceHot Melt Bookbinding Glue Vs Water-Based (PVA) Glue

Hot Melt Bookbinding Glue

EVA-based hot melt adhesive sets in seconds, making it the go-to choice for automated binding lines. It is applied at 160°C to 180°C through a heated glue pot or tank and delivers a firm, flexible bond once it cools.

Water-Based (PVA) Glue

PVA book binding gum applies at room temperature using a roller or brush, giving binderies more open time and a highly flexible final bond. It is the preferred choice for eco-conscious production and case binding operations.

ProcessHow to Apply Bookbinding Glue

01

Select the Right Grade

Match your adhesive to paper GSM, binding method, cover type, and machine speed.

02

Preheat (Hot Melt Only)

Heat glue pot to 160°C–180°C as directed on the product datasheet before starting.

03

Apply to Spine / Side

Lay an even coat on the spine using your machine roller, nozzle, or brush system.

04

Press & Bond

Bring cover or endpaper into full contact with aligned clamp pressure for a clean bond.

05

Cool / Cure

Let hot melt cool fully or water-based adhesive air-dry before trimming or finishing.

06

Quality Check

Test a sample for page pull, spine flex, and edge bond before running the full batch.

PackagingBookbinding Glue Packaging & Bulk Ordering

Trial / Sample Supply

For new buyers testing grade fit and machine compatibility before bulk ordering.

Standard Drum / Block

For binderies with steady weekly or monthly production requirements.

Bulk / Tanker Supply

For large publishers and high-volume binderies running continuous operations.

FAQFrequently Asked Questions

Find clear answers about our bookbinding adhesive grades, packaging formats, sample orders, bulk supply, and how our team supports your production needs. We work with both new buyers testing compatibility and established binderies placing regular large-volume orders.
Hot melt bookbinding glue is made from EVA (ethylene-vinyl acetate) polymer, while water-based book binding gum uses PVA (polyvinyl acetate) emulsion. Both types bond paper, board, and cloth substrates used in book manufacturing.
Hot melt adhesive suits automated lines needing fast set for high-speed perfect binding. PVA bookbinding gum works best for case binding, hand operations, and binderies where flexibility and eco-conscious production matter more than speed.
Yes. Our hot melt grades work for paperback (perfect binding) and hardcover (case binding and endpaper attachment). PVA adhesive is also used for case binding and hand-crafted work where open time and flexibility are needed.

Hot melt glue for bookbinding is applied between 160°C and 180°C. Too high causes charring and bond weakness. Too low means poor spine penetration and weak page adhesion after the glue sets and cools.

Store hot melt blocks in a cool, dry area away from heat and sunlight. Keep PVA bookbinding gum above 5°C to avoid freeze damage. Both types have a 12-month shelf life from manufacture when stored correctly.

Get a Bookbinding Glue Quote Today

Speak with our technical team to find the right adhesive for your binding process.

Contact Us