HOME COMPANY PRODUCTS INFRASTRUCTURE
APPLICATIONS NETWORK CAREERS CONTACT US
04
Products
Yellow 4 Series
Rubber Based Adhesives
Wood Working Adhesives
PVC Membrane Glues
Hot Melts
Pipe Glues & Sealants
Wood Finishes
Other Products
Download Brochures
Product Profile
Industrial Adhesives
Wood Working & Furniture
Industry Adhesives
Applications
Wood Working Applications
For Pipe Jointing
Footwear and Leather
For Automobiles
Car Interiors /Bus Body
For Notebooks/Packaging/
Other Paper Converters
For Mattresses/Sofa/Chair
Other Furniture
For 3D Lamination
(PVC Membrane Doors
& Kitchen cabinets)
For PVC to Wood/Ply
For Wood Coatings on Furniture
   
 
Hot Melts  
SUPER MELT 400

SUPER MELT 400 is an EVA based thermoplastic hot melt adhesive, specially formulated for multipurpose applications – spine pasting, side pasting, in book binding, box sealing, etc. It exhibits high cohesive strength.

Key Features: Exhibits excellent cohesive strength, durable bonding, high coverage, low softening point, multiple applications, No dour and No fumes.

Application Instructions:

  • The adhesive is recommended to be applied on one side of the substrate, then two sides are adhered using suitable pressure within the open time.
  • The open time varies, as it depends upon various factors such as operating speed, volume of the adhesive, application temperature, room temperature, humidity, etc.
  • The pot must be cleaned regularly to prevent the oxidized substances in the pot, which will result in poor bonding. Remove the stained adhesive and clean the walls of the glue pot with a scrapper or paraffin wax.
  • The adhesive should not be kept in the tank at a high temperature for a long time as this will affect the flowing properties of the adhesive.
  • Avoid using adhesive at higher temperatures i.e., above 200 Deg. C.
Storage & Packaging: We supply in 30 Kg, paper bags, temperature for storage is between 0*C to 30*C, away from direct sun light. SUPER MELT 400 has a shelf life of 12 months.
   
 
SUPER MELT 700

SUPER MELT 700 is an EVA based thermoplastic hot melt adhesive, specially formulated for mattresses industries for non woven to non woven for pocket application etc. It exhibits high cohesive strength.

Key Features: Exhibits excellent cohesive strength and durable bonding.

Application Instructions:

  • The adhesive is recommended to be applied on one side of the substrate, then two sides are adhered using suitable pressure within the open time.
  • The open time varies, as it depends upon various factors such as operating speed, volume of the adhesive, application temperature, room temperature, humidity, etc.
  • The pot must be cleaned regularly to prevent the oxidized substances in the pot, which will result in poor bonding. Remove the stained adhesive and clean the walls of the glue pot with a scrapper or paraffin wax.
  • The adhesive should not be kept in the tank at a high temperature for along time as this will affect the flowing properties of the adhesive.
Storage & Packaging: We supply in 30 Kg bags, temperature for storage is between 0°C to 30°C, away from direct sun light. SUPER MELT 700 has a shelf life of 12 months.
   
 
SUPER BOND HMF-101 A

(Product Classification – Hot melt adhesive for PVC edge Banding)
SUPER BOND HMF-101 A, is an EVA based thermoplastic hot melt adhesive, specially formulated for furniture edge binding of PVC / ABS to wood/ply by automatic machine, operated at 190-200 Deg. C.

Key Features: Exhibits excellent and durable bonding in PVC Edge banding.

Application Instructions:

  1. Temperature at the applicator roll: 190-200ºC
  2. Suggested temperature for glue tank: 190-200ºC          
  3. Feed speed:  > 20M/min.  
  4. Room and materials temperature: 10-35ºC
  5. Wood moisture: 8-10%
  6. Pressure on edges: 3-5Kg/cm2.
  7. Suggested amount of glue application: 180-250 g/M2
Storage & Packaging: We supply in 25 Kg, paper bags, temperature for storage is between 0*C to 30*C, away from direct sun light. SUPER BOND HMF-101 A has a shelf life of 4 years.
   
 
SUPER BOND HMF-102

(Product Classification – Hot melt adhesive for PVC edge Banding)
SUPER BOND HMF-102 is an EVA based thermoplastic hot melt adhesive, specially formulated for furniture edge binding of PVC / ABS to wood/ply by manual machine, operated at 190-200 Deg. C.

Key Features: Exhibits excellent and durable bonding in PVC Edge banding.

Application Instructions:

  1. Temperature at the applicator roll: 190-200ºC.
  2. Application method – Roller.
Storage & Packaging: We supply in 25 Kg, paper bags, temperature for storage is between 0*C to 30*C, away from direct sun light. SUPER BOND HMF-102 has a shelf life of 4 years.
   
 
Home Company Products Infrastructure Applications Network Careers Site Map Contact Us